Data Encryption Systems Limited Release Notes 09 September 2021 TABLE OF CONTENTS ----------------- 1. New Features, Enhancements and Important information 2. Running the installation 3. Known Problems & Current Limitations 4. Changes History 1. New Features, Enhancements and Important information ------------------------------------------------------- - New Windows 10 USB driver works with all enhanced security modes including HVCI - Installs on the following operating systems (32 & 64 bit) : Windows XP, Windows XP Embedded (See note in 3 below for device support) Vista Windows 7, Windows 7 Embedded Windows 8, Windows 8 Embedded, Windows 8.1, Windows 8.1 Embedded Windows 10 Server 2003, Server 2003 R2 Server 2008, Server 2008 R2 Server 2012, Server 2012 R2 Server 2016 Server 2019 - Supported device types : USB - DESkey DK2USB and DKUSB2 USB - DK2USB/B and DK2USB/D Parallel - DK2 2. Running the installation --------------------------- - Will only work on the latest operating systems as listed above, if you require one that is not supported please visit www.des.co.uk or email support@des.co.uk - Will not run in 'Compatibility Mode' please email support@des.co.uk for assistance - Command Line switches - full list is at http://www.jrsoftware.org/ishelp/index.php?topic=setupcmdline /SILENT - Installation progress only - will ask to reboot if necessary /VERYSILENT - Installation silent, no progess during install, if reboot necessary will not ask and just carry out reboot /NORESTART - Will not reboot if necessary, combine with /SILENT or /VERYSILENT copylogfiles - Copies setup log and usb install log files to users desktop - Setup exit codes (errorlevel) - full list at http://www.jrsoftware.org/ishelp/index.php?topic=setupexitcodes 0 - Installation completed without any errors 1 - Installation failed to initialise 2 - User clicked 'Cancel' before the installation started 3. Known Problems & Limitations ------------------------------- - On XP DK2USB/B and DK2USB/D devices are not supported - On Windows 7.1 and Server 2008 - On Windows 10, DESkey DK2USB and DKUSB2 appears in device manager under Universal Serial Bus devices - On Windows, DK2USB/B and DK2USB/D device appears in device manager under Human Interface Devices as USB Input Device and HID-compliant vendor-defined device - Compact Flash or PCMCIA/PCCard device support is provided with 7.x.x.x installs - Does not support command line install to configure server details, eg location of DK2 Network Server 4. Change History ----------------- 8.20.14 - Updates to DESkey control panel - Compatibility with DESkey DK3 installations 8.19.13 ------- - FindFirstDK2/FindNextDK2 updated to work with DK2USB/B and DK2USB/D devices 8.19.12 ------- - Application verifier checked. 8.19.11 ------- - Ability to turn off v30 support using an advanced option in the DESkey control panel. Should only be used during development & debugging of protected applications. When set a DESkey DK2USB or DK2USB2 will need to be used if access to a device is required. 8.19.9 ------ - Securely reading and extracting of the roll counter and DUSN using v30 devices now work with DK2 libraries. 8.19.8 ------ - Preserves configuration of a previous installation - Allows updating of v7.x.x.x if the following error is shown when using a v8.19.7 or earlier install : "Cannot update current DK2 install, please uninstall or contact support." 8.19.7 ------ - Contents of memory from v30 DK3 read correctly after accessing v30 DK2 8.19.6 ------ - Licence Request updated to work when called from DK2 Network Server remote monitor - Firewall rule configured when installing DK2 Network Server is less restrictive than in previous installs 8.19.5 ------ - v7.x.x.x uninstalls on 32 bit during upgrading to v8.x.x 8.19.3 ------ - v7.x.x.x install will not uninstalled until 'Install' button is clicked. 8.19.2 ------ - Installation of v7.x.x.x now possible after uninstalling 8.x.x - Uninstall cleans up registry - Uninstall removes installed services for parallel driver and DK2 Network server if installed - After install completed no longer references to running application 8.19.1 ------ - DK2 parallel driver installed 8.19.0 ------ - Network licencing commands fixed to work with DK2USB/B and DK2USB/D devices 8.18.2 ------ - Improved speed of finding DK2USB/B and DK2USB/D devices 8.18.1 ------ - Fixed possible issue when upgrading from 7.x.x.x 8.18.0 ------ - Upgrading from 7.x.x.x is supported 8.17.0 ------ - Fixed DK2 memory compatibility when using DK2USB/B & DK2USB/D devices - Fixed exception due to running out of handles when using DK2USB/B & DK2USB/D devices - Memory read and write speed improved 8.16.0 ------ - DK2 Network Support - client and server implemented - Updated DESkey control panel 8.15.0 ------ - Added DESkeyAPI 1.0.12 - Implement FindFirst/FindNext to call DESkeyAPI 8.14.0 ------ - Version number updated from Major.Minor.Special.Build to Major.Minor.Patch - DESkeyAPI updated detection of devices when calling DESkeyAPI_Find if normal commands are disabled 8.13.0.19 --------- - DK2USB/B and DK2USB/D HID devices are supported in FindFirst, FindNext, RequestDUSN & ExtractDUSN. 8.12.0.18 --------- - DK2USB/B and DK2USB/D devices containing 1Kb+ of memory can be written without possible corruption. 8.11.0.17 --------- - Updated support for DK2USB/B and DK2USB/D devices 8.9.0.15 -------- - Windows 10 WHLK certified driver - 32 & 64 bit 8.8.0.14 -------- - Turn off DK2 API checking of DK2 parallel devices due to invalid errors reported by DESwrap when no DK2 parallel driver has been installed. 8.7.0.13 -------- - USB driver installs on Windows 10 with Secure Boot enabled 8.6.0.11 -------- - Update to fix hanging when carrying out a remote update of the DK2 - Install is supported on XP - Install now installs over previous versions 8.5.0.10 -------- - Improved detection of new devices with virtual machine - DK2ReadMemory access issue fixed when used with new devices 8.4.0.9 ------- - FindDK2 updated so as not to show unplugged DK2USB/B and DK2USB/D deivce after a successfull find 8.3.0.6 ------- - DESkey control panel shown on 64 bit 8.2.0.4 ------- - Updated install script for improved updating from a previous install - Updates to DK2USB/B and DK2USB/D handling - XP support added - All files are now dual signed with SHA1 & SHA256 8.1.0.3 ------- - Registry updated after install has finished - DK2USB/B and DK2USB/D device support 8.1.0.2 ------- - Initial version using Inno Setup 5.5.9 as creation package